Printing The Pictures - Panasonic Lumix DMC-LS85 Operating Instructions Manual

Printing the Pictures

By connecting the camera directly to a printer supporting PictBridge via the USB connection
cable (supplied), you can select the pictures to be printed or start printing on the LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
1
Connect the camera to a printer via the USB connection cable A (supplied).
• Do not use any other USB connection cables except the supplied one.
A USB connection cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight
out. (Otherwise the connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
• Use batteries with suffi cient battery power or the AC adaptor (optional: P103) and DC
coupler (optional: P103). If the remaining battery power becomes low while the camera
and the printer are connected, the status indicator blinks and the alarm beeps. If this
happens during printing, stop printing at once. If not printing, disconnect the USB
connection cable.
• Always use a genuine Panasonic AC adaptor (DMW-AC6PP: optional) and DC coupler
(DMW-DCC2: optional).
• When the camera is connected to the printer, the cable disconnect prohibit icon [1]
appears. Do not disconnect the USB connection cable while [1] is displayed.
2
Press e / r to select [PictBridge(PTP)], and then
press [MENU/SET].
Note
• We recommend placing a soft cloth under this unit to prevent scratching.
• Turn the camera off before connecting or disconnecting the AC adaptor (optional: P103).
• Before inserting or removing a card, turn the camera off, and disconnect the USB
connection cable.
• You cannot switch between the built-in memory and the card while the camera is
connected to the printer. Disconnect the USB connection cable, insert (or remove) the
card and then connect the USB connection cable to the printer again.
B
AV OUT
/DIGITAL
Connecting to other equipment
A
SELECT
USB MODE
PLEASE SELECT
THE USB MODE
SET
77
VQT1X05