S [Text Stamp] - Panasonic Lumix DMC-LS85 Operating Instructions Manual

[MULTI] setting
1 In step 4 , delete all the texts, select [EXIT], and press [MENU/SET].
2 Press [MENU/SET] to close the menu.
Note
• Text can be scrolled if all of the registered text does not fi t on the screen.
• The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode or [TRAVEL DATE]
location setting can also be registered by using the operation in steps 4 and following.
• The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode, [TRAVEL DATE]
location setting and [TITLE EDIT] cannot be registered at the same time.
• You can print out texts (comments) using the "PHOTOfunSTUDIO" bundled software on
the CD-ROM (supplied).
• You can set up to 50 pictures at one time with [MULTI].
• You cannot use [TITLE EDIT] for motion pictures, pictures protected and pictures taken
with other equipment.
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures larger than 3M will be resized when
stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] menu. (P18)
1
Press e / r to select [SINGLE] or [MULTI] and
2
press [MENU/SET].
Select the picture, and then
3
press [MENU/SET] to set.
• [d] A appears on the screen if
the picture have added the text
stamp.
For [MULTI] setting
Press [DISPLAY] to set (repeat),
and then press [MENU/SET].
• The setting is canceled when
[DISPLAY] is pressed again.
Press e / r / w / q to select [SHOOTING DATE], [AGE], [TRAVEL DATE]
4
or [TITLE], and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[W/O TIME]:
[WITH TIME]: Stamp the year, month, day, hour and minutes.
[AGE] (P45)
If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE]
If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.

s [TEXT STAMP]

Stamp the year, month and date.
[SINGLE]
Press w/q to
select the picture.
Advanced-Viewing
[MULTI]
Press e/r/w/q to
select the pictures.
VQT1X05
A
67