About The Built-In Memory/The Card - Panasonic Lumix DMC-LS85 Operating Instructions Manual

About the Built-in Memory/the Card

The following operations can be performed using this unit.
• When a card has not been inserted: Pictures can be recorded in the built-in memory and
played back.
• When a card has been inserted: Pictures can be
recorded on the card and played back.
• When using the built-in memory
[1] [2] (access indication
• When using the card
[3] (access indication
1
The access indication lights red when pictures are
being recorded on the built-in memory (or the card).
• Memory size: Approx. 50 MB
• Recordable motion pictures: QVGA (320 × 240 pixels) only
• The built-in memory can be used as a temporary storage device when the card being
used becomes full.
• You can copy the recorded pictures to a card. (P74)
• The access time for the built-in memory may be longer than the access time for a card.
The following types of cards can be used with this unit.
(These cards are indicated as card in the text.)
Type of card
SD Memory Card (8 MB to 2 GB)
(Formatted using the FAT12 or FAT16
format in compliance with the SD
standard)
SDHC Memory Card (4 GB to 32
2
GB)
(Formatted using the FAT32 format in
compliance with the SD standard)
MultiMediaCard
2
The SDHC Memory Card is a memory card standard decided by the SD Association in
2006 for high capacity memory cards more than 2 GB.
You can use an SDHC Memory Card in equipment that is compatible with SDHC
Memory Cards however you cannot use an SDHC Memory Card in equipment that is
only compatible with SD Memory Cards. (Always read the operating instructions for the
equipment being used.)
• You can only use cards with SDHC logo (indicating compliance with the SD standard) if
using cards with 4 GB or more capacity.
• Please confi rm the latest information on the following website.
http://panasonic.co.jp/pavc/global/cs
(This Site is in English only.)
1
)
1
)
Built-in Memory
Card
• Fast recording and writing speed
• Write-Protect switch A provided
(When this switch is set to the [LOCK]
position, no further data writing,
deletion or formatting is possible. The
ability to write, delete and format data
is restored when the switch is returned
to its original position.)
• Still pictures only.
Characteristics
Preparation
15
VQT1X05