Panasonic Lumix DMC-L1 Operating Instructions Manual page 60

Advanced
∫ The available flash range to take
pictures (when the supplied lens is
attached)
The available flash settings for the built-in
flash differ depending on the ISO sensitivity
setting.
the available flash range
ISO
to take pictures
sensitivity
Wide
2.5 m
(8.2 feet) to
AUTO
7.0 m
(23.0 feet)
2.5 m
(8.2 feet) to
ISO100
3.5 m
(11.5 feet)
2.5 m
(8.2 feet) to
ISO200
5.0 m
(16.4 feet)
2.5 m
(8.2 feet) to
ISO400
7.0 m
(23.0 feet)
2.5 m
(8.2 feet) to
ISO800
9.8 m
(32.1 feet)
2.5 m
(8.2 feet) to
ISO1600
14.0 m
(46.0 feet)
• Refer to P71 for the ISO sensitivity.
• Refer to P34 for the focus range.
• If ISO sensitivity is set to [AUTO] when
using the flash, it will be automatically
increased to a maximum of [ISO400].
60
VQT0W82
• If the distance between the camera and
the subject is less than 2.5 m (8.2 feet)
when taking a picture with the flash, the
photo flash will be obscured by the lens
and one part of the screen will become
dark. Check the distance between the
camera and the subject when taking a
picture.
• To avoid picture noise, we recommend
Tele
reducing the ISO sensitivity before taking
pictures. (P71)
1.0 m
(3.3 feet) to
∫ Shutter speed for each flash setting
5.6 m
(When the built-in flash is activated)
(18.4 feet)
1.0 m
(3.3 feet) to
2.8 m
(9.2 feet)
1.0 m
(3.3 feet) to
4.0 m
(13.1 feet)
1.0 m
• The flash sync. speed becomes more
(3.3 feet) to
than 1/160th of a second.
5.6 m
(18.4 feet)
1.0 m
• Do not look directly at the flash at
(3.3 feet) to
close range when it is activated.
7.8 m
• Do not bring the flash too close to
(25.6 feet)
objects or close the flash while it is
1.0 m activated. The objects may be
(3.3 feet) to
discolored by its heat or lighting.
11.2 m
• Do not cover the photo flash with your
(36.7 feet)
fingers or other objects.
• Do not carry the camera using the opened
built-in flash.
• Do not close the flash soon after it is
activated prior to taking pictures due to
auto/red-eye reduction etc. It causes a
malfunction.
• If you press the shutter button halfway
when the flash is activated, the flash icon
on the LCD monitor turns red.
1/30th of a
second
60 seconds
1/30th of a
to 1/160th of
second to
a second
1/160th of a
second
1 second
to 1/160th cannot set a flash setting
of a second
cannot set a
flash setting
B (Bulb) to
1/160th of a
second