Manual Exposure - Panasonic Lumix DMC-L1 Operating Instructions Manual

Basic

Manual Exposure [

Determine the exposure by manually
setting the aperture value and the shutter
speed.
1 Set the aperture value and the
shutter speed.
Rotate the aperture ring to set the
aperture value.
A
A: [2.8] to [22]
• When changing from [A], rotate the
aperture ring while pressing the
aperture ring button B.
Rotate the shutter speed dial to
set the shutter speed.
C
ON
OFF
M M F 22 22 1000 1000
STANDARD STANDARD
WB WB
- 2 - 1
AUTO AUTO
ISO ISO
100 100
SINGLE SINGLE
C: [2-60s/B] to [1000-4000]
• The mode becomes manual exposure
mode [ ].
• If the shutter speed dial is set to [2-60s/
B] or [1000-4000], press 3/4 or rotate
38
VQT0W82
]
B
2 Press the shutter button halfway.
0 +1 +1 +2 +2
CUSTOM CUSTOM
NORMAL NORMAL
19 19
3 Press the shutter button fully to
the command dial D to set the shutter
speed.
M F 22 22 1000 1000
STANDARD STANDARD
WB WB
-2 -1 0
AUTO AUTO
ISO ISO
100 100
SINGLE SINGLE
• You can set from 1/2 of a second to
60 seconds in steps of [1/3 EV] if the
shutter speed dial is set to [2-60s/B].
The next setting after 60 seconds is [B]
(Bulb). Refer to P39 for information
about the B (Bulb) setting.
• You can set from 1/1000 of a second to
1/4000 of a second in steps of [1/3 EV]
if the shutter speed dial is set to
[1000-4000].
• If you set [DIREC. EX. COMP.] (P85) to
[ON], you cannot use the command
dial.
E
F
E: Viewfinder Display
• Manual exposure assistance F
appears for about 10 seconds to show
an approximation of the exposure
condition.
• If the exposure is not adequate, check
the aperture value and the shutter
speed that have been set.
take the picture.
+1 +1 +2 +2
CUSTOM CUSTOM
NORMAL NORMAL
19 19
D