Playing Back Pictures - Panasonic Lumix DMC-L1 Operating Instructions Manual

Basic

Playing Back Pictures

1 Press [
].
P F5.6 125 F5.6 125
2 Press 2/1 to select the picture.
P F5.6 F5.6 125 125
2: Play back the previous picture
1: Play back the next picture
• The first recorded picture will be
displayed after the last recorded
picture.
• When [ROTATE DISP.] is set to [ON],
pictures recorded by holding the
camera vertically are played back
vertically. (P91)
∫ Fast forwarding/Fast rewinding
2 1
Press and hold / during playback.
P F5.6 125 F5.6 125
2: Fast rewind
1: Fast forward
44
VQT0W82
ISO ISO
100 100
1/19 1/19
100 _ 0001
10 0001
ISO ISO
100 100
1/19 1/19
100 _ 0001
10 0001
ISO ISO
100 100
A
1/19 1/19
B
100 _ 0001
10 0001
• The file number B and the picture
number A only change one by one.
Release 2/1 when the number of the
desired picture appears to play back the
picture.
• If you press and hold 2/1, the number
of files forwarded/rewound at one time
increases. (The actual number of files
forwarded/rewound at one time
depends on the number of files
recorded.)
• You can only fast forward or fast rewind
pictures one by one in multi playback.
(P48)
∫ To finish playback
Press [ ] again or press the shutter
button halfway.
• This camera is based on the DCF
standard "Design rule for Camera File
system" which was established by the
"Japan Electronics and Information
Technology Industries Association
(JEITA)".
• The file format that can be played back on
the camera is JPEG. (In some cases,
even JPEG pictures cannot be played
back.)
• The LCD monitor may not be able to
display the details of the recorded
pictures. You can use the playback zoom
(P47) to check the details of the pictures.
• If you play back pictures that have been
recorded with other equipment, the picture
quality may deteriorate. (The pictures are
displayed as [THUMBNAIL IS
DISPLAYED] on the screen.)
• If you change a folder name or file name
on your PC, the pictures may not play
back on the camera.
• If you play back a non-standard file, the
folder/file number is indicated by [—] and
the screen may turn black.