Panasonic Lumix DMC-L1 Operating Instructions Manual page 30

Preparation
• There may be white saturated areas if the
distance between the camera and the
subject is too close when taking pictures
with the flash. If [HIGHLIGHT] is set to
[ON] in this case, these white saturated
areas appear blinking in black and white.
[VIDEO OUT]
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P27)
[NTSC]: Video output is set to NTSC
system.
[PAL]: Video output is set to PAL
system.
• Video output is available in playback
mode only.
[TV ASPECT]
Press [ MENU ] to display the [SETUP] menu
SET
and select the item to set. (P27)
[ ]:
Select this if connecting the camera to a
16:9 screen TV.
[ ]:
Select this if connecting the camera to a
4:3 screen TV.
• The TV aspect setting is effective in
playback mode only.
• [ ] is suitable for displaying pictures
recorded when the aspect ratio setting is
[ ] on the full screen of a 16:9 TV.
However, pictures recorded when the
aspect ratio setting is [
be displayed with black bands on the left
and right of the screen.
• When [ ] is selected, pictures recorded
when the aspect ratio setting is [
[ ] are displayed with black bands on
the top and bottom of the screen.
30
VQT0W82
• When you select [
Video cable (supplied) for output (P104),
pictures are displayed vertically on the
LCD monitor.
[LANGUAGE]
Press [
and select the item to set. (P27)
Set the language on the menu screen from
the following languages. Press 3/4 to set
the desired language and then press
[MENU/SET].
[ENGLISH]:
[DEUTSCH]: German
[FRANÇAIS]: French
[ESPAÑOL]: Spanish
[ITALIANO]:
[
[
• If you set a different language by mistake,
select [
desired language.
] or [ ] will
] or
] and use the
MENU
] to display the [SETUP] menu
SET
English
Italian
]: Chinese (Traditional)
]: Japanese
] from the menu icons to set the