Panasonic Lumix DMC-L1 Operating Instructions Manual page 41

• The exposure compensation value is
displayed on the LCD monitor when
taking pictures with Live View. Refer to
P50 for information about Live View.
3 Press the shutter button halfway
to set the selected exposure.
• You can also set the selected exposure
by doing the following:
– Pressing [FUNC.2]
– Not operating the camera for a few
seconds
∫ If you are using the command dial
only to compensate the exposure
If you set [DIREC. EX. COMP.] to [ON], you
can compensate the exposure by rotating
the command dial only and do not have to
press [FUNC.2]. (It is set to [OFF] at the
time of purchase.)
1 Press [MENU/SET] and then
press 2.
REC
FILM MODE
PICT.SIZE
QUALITY
RAW REC.
ASPECT
SELECT
2 Press 4 to select the [CUSTOM]
] and then press 1.
menu icon [
CUSTOM
CUSTOM SET
CUST. SET MEM.
FUNC.1 SET
FUNC.2 SET
DIREC. EX. COMP.
SELECT
3 Press 3/4 to select
[DIREC. EX. COMP.] and then
press 1.
4 Press 4 to select [ON] and then
press [MENU/SET].
5 Press [MENU/SET] to close the
menu.
• You can also press the shutter
/
1
MENU
3
SET
• After performing steps
the command dial to compensate the
exposure.
OFF
EXIT MENU
• EV is an abbreviation of "Exposure Value".
It refers to the amount of light given to the
CCD by the aperture value and the shutter
/
1
speed.
4
NORMAL
• The set exposure value is memorized
even if the camera is turned off.
• The compensation range of the exposure
OFF
will be limited depending on the
MENU
EXIT
brightness of the subject.
• Rotate the command dial slowly but
surely.
• You cannot compensate the exposure in
manual exposure mode.
• Refer to P73 for information about setting
a different function to [FUNC.2].
CUSTOM
CUSTOM SET
CUST. SET MEM.
FUNC.1 SET
FUNC.2 SET
DIREC. EX. COMP.
SELECT EXIT
CUSTOM
CUSTOM SET
CUST. SET MEM.
FUNC.1 SET
FUNC.2 SET
DIREC. EX. COMP.
SELECT SET
button halfway to close the menu.
1
Basic
/
1
4
NORMAL
OFF
MENU
1 /
4
NORMAL
OFF
MENU
ON
MENU SET
5
to , rotate
41
VQT0W82