5
Press [MENU/SET].
•
If you set [TEXT STAMP] for a picture with a picture size larger than [
size will become smaller as shown below.
Aspect ratio setting
•
The picture becomes slightly rougher.
6
Press 3 to select [YES] and then press [MENU/
SET].
•
The message [SAVE NEW PICTURES?] appears if the picture
was recorded with a picture size [
7
Press [‚] to return to the menu screen.
¢ The menu screen is automatically restored when [MULTI] is selected.
•
Press [MENU/SET] to close the menu.
Note
•
When you print pictures stamped with text, the date will be printed over the stamped text if you
specify printing of the date at the photo shop or on the printer.
•
You can set up to 50 pictures at one time in [MULTI].
•
Depending on the printer being used, some characters may be cut at printing. Check before
printing.
•
When text is stamped onto the [
•
Text and dates cannot be stamped on the pictures taken with other equipment.
Q [RESIZE] Reducing the picture size (number of pixels)
We recommend resizing to [
website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be further
reduced in size.)
1
Select [RESIZE] on the [PLAYBACK] mode menu. (P18)
2
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
3
Select the picture and size.
[SINGLE] setting
1
Press 2/1 to select the picture,
and then press [MENU/SET].
2
Press 2/1 to select the size
then press [MENU/SET].
¢ Only the sizes to which the pictures can
be resized is displayed.
X
Y
W
] pictures, it is difficult to read it.
] if you want to attach a picture to an e-mail or use it on a
¢
, and
] or less.
¢
Advanced (Playback)
], the picture
Picture size
>
/
/
>
/
/
>
/
/
[SINGLE]
79
VQT1P09