Connecting to other equipment
Playing Back Pictures on a TV Screen
Playing back pictures using the AV cable (supplied)
Preparations:
Set the [TV ASPECT]. (P23)
Turn this unit and the TV off.
1
2
1 Yellow: to the video input socket
2 White: to the audio input socket
A Align the marks, and insert.
B AV cable (supplied)
•
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
1
Connect the AV cable B (supplied) to the video input and the audio
input sockets on the TV.
2
Connect the AV cable to the [AV OUT] socket on the camera.
3
Turn the TV on and select external input.
4
Turn the camera on.
Note
•
Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or
the left and right of the pictures.
•
Do not use any other AV cables except the supplied one.
•
Read the operating instructions for the TV.
•
When you play back a picture vertically, it may be blurry.
•
You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system
when you set [VIDEO OUT] in the [SETUP] menu.
•
Even if you set [VIDEO OUT] to [PAL], the output signal will still be NTSC in the recording mode.
Playing back pictures on a TV with an SD Memory Card slot
Still pictures recorded on an SD Memory Card can be played back on a TV with an SD Memory
Card slot.
Note
•
Depending on the TV model, pictures may not be displayed on the full screen.
•
Motion pictures cannot be played back. To play back motion pictures, connect the camera to the
TV with the AV cable (supplied).
94
VQT1P09
B
A