[Text Stamp] - Panasonic Lumix DMC-FX35 Operating Instructions Manual

Advanced (Playback)
Note
•
Text can be scrolled if all of the registered text does not fit on the screen.
•
The name setting of [BABY1]/[BABY2] or [PET] in scene mode can also be registered by using
the operation in steps
•
The name setting of [BABY1]/[BABY2] or [PET] in scene mode and [TITLE EDIT] cannot be
registered at the same time.
•
You can print out texts (comments) using the "PHOTOfunSTUDIO-viewer-" bundled software on
the CD-ROM (supplied).
•
You can set up to 50 pictures at one time with [MULTI].
•
You cannot use titles edit for pictures taken with other equipment.
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [
when stamping the date etc. on them.)
1
Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P18)
2
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
3
Select the picture, and then
press [MENU/SET] to set.
•
['] A appears on screen if the
picture is stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat),
and then press [MENU/SET] to set.
•
The setting is canceled when
[DISPLAY] is pressed again.
4
Press 3/4/2/1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE]
or [TITLE] and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[W/OTIME]:
[WITHTIME]:
[AGE] (P48)
If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE]
If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
[TITLE]
Text is printed together with the image for pictures that have already been recorded
with text in [BABY1]/[BABY2] or [PET] name settings in scene mode or [TITLE
EDIT].
78
VQT1P09
4
and following.

[TEXT STAMP]

Stamp the year, month and date.
Stamp the year, month, day, hour and minutes.
[SINGLE]
Press 2/1 to
select the picture.
] will be resized
[MULTI]
Press 3/4/2/1 to
select the pictures.
A