Handle Height - Briggs & Stratton BRUTE BTPV22675E Safety Instructions & Operator's Manual

Preparation (Continued)
Adjusting the Handle Height
1. Remove the wingnuts (A, Figure 4), washers (not
shown), and bolts (B) from the right and left handle
brackets (C).
Note: Do not remove the lower set of handle hardware (D) .
2. Adjust the handle to a higher or lower height adjustment
hole (A, Figure 5).
3. Reinstall the bolts, washers and wingnuts removed in
Step 1.
B
D
Figure 4: Removing the handle adjustment hardware
A
Figure 5: Height adjustment holes
(Components removed for clarity)
A
C
7