Operation; Adjusting The Handle Height - Briggs & Stratton Brute BT2265HW Safety Instructions And Operator's Manual

Operation

Adjusting the Handle Height

1. Remove the wingnuts (A, Figure 1), washers (not
shown), and bolts (B) from the right and left handle
brackets (C).
Note: Do not remove the lower set of handle hardware (D) .
2. Adjust the handle to a higher or lower height adjustment
hole (A, Figure 2).
3. Reinstall the bolts, washers and wingnuts removed in
Step 1.
B
D
Figure 1: Removing the handle adjustment hardware
A
Figure 2: Height adjustment holes
(Components removed for clarity)
A
C
5