Programming Mode - Test Mode - LG RN1870AH1 Owner's Manual

PROGRAMMING MODE - Test Mode

Diagnostic tests :
This program has been added for testing the dryer and detecting errors.
Entering the test mode
Data
Machine
Name
1. Entering
CARD /
COIN
2. High Temp.
Enter-
3. Start
ing
the test
1. Entering
mode
OPL
2. High Temp.
3. Start
(display)
Button Display
programming
mode
programming
mode.
Description
Insert service card (Card type), Turn on/off toggle switch
(Coin type).
Press the High Temp. button.
Then appears in the display.
Enter the diagnostic test mode.
Push and hold the High Temp. and Low Temp. at the same time.
After that push Med Temp. button for 3 times. Push Start but-
ton.
Press the High Temp. button.
Then appears in the display.
Enter the diagnostic test mode.
PROGRAMMING MODE
43