USING THE PROJECTOR
Alert Setup
You can send email alerts when an error occurs. You can carry out settings for alert mail in this
section.
1. Alert types: Check the type of error for which you want to send alert mail.
2. Alert mail notification: Check and perform the following settings:
- SMTP Setting: Set the following:
a) SMTP Server: Server address (server name) (SMTP server)
b) From: e-mail address of the sender
c) User Name: User name of the mail server
d) Password: Mail server password.
- Email Setting: Set the following:
a) Mail Subject
b) Mail Content
c) To: Enter the e-mail address of the sender.
3. Click "Apply" to fix the value.
4. Enter the IP address of projector in *xxx.xxx.xxx.xxx.
5. Send Test Mail.
When you click [Send Test Mail], test email will be sent. The text will be "Email Test xxx.xxx.xxx.xxx *".
52
English