Table of Contents
Advertisement
USING THE PROJECTOR
Menu navigation and features
The projector has multilingual on-screen display menus that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect the source.
1.
To open the OSD menu, press the
2.
When OSD is displayed, use
selection on a particular page, press the
sub menu.
3.
Use
/
further settings. Adjust the settings by using
4.
Select the next item to be adjusted in the sub menu and adjust as described above.
5.
Press the
6.
To exit, press the
the new settings.
Main Menu
/
keys to select any item in the main menu. While making a
keys to select the desired item in the sub menu and then press the
button to confirm, and the screen will return to the main menu.
button again. The OSD menu will close and the projector will automatically save
Submenus
Picture Mode
Dynamic Range
Brightness
Contrast
Sharpness
Gamma
Color Settings
Wall Color
3D
Reset
button on the projector keypad or remote control.
button on the projector keypad or remote control to enter
/
/
/
keys.
Image
button to view
Settings
Bright
Off
English
23
Advertisement
Table of Contents
