Replacing the rear fan
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer cover. See "Removing the computer cover" on page 14.
2. Remove the front bezel. See "Replacing the front bezel" on page 15.
3. Pivot the drive bay assembly upward. See "Pivoting the drive bay assembly upward and downward" on
page 18.
4. Disconnect the rear fan cable from the system board.
5. Replace the rear fan.
Figure 86. Removing the rear fan
Figure 87. Installing the rear fan
.
Chapter 4
Replacing hardware
53