Advertisement
Assembly
1
Attaching the Right and Left Leg
□
Attach the right leg (C) and left leg (D) to the seat (A) using bolts (AA), washers (HH/EE), and nuts (DD). Use the wrench (II) to hold the
nuts (DD) in place while you tighten with the Key (JJ).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly. Ensure you attach the plastic washers in each
wood join part of the chair. Failure to attach these plastic washers will cause the chair to not fold properly and damage to the chair.
D
2
Attaching the Wood Slat
□
Attach the wood slat (H) to the legs (C/D) using screws (CC). Tighten with a Phillips screwdriver.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly. Ensure you attach the plastic washers in each
wood join part of the chair. Failure to attach these plastic washers will cause the chair to not fold properly and damage to the chair.
A
C
H
H
A
D
C
A
DD
I I
D
A
H
5
Please contact 1-855-HD-HAMPTON for further assistance.
C
EE
HH
AA
HH
CC
C
AA
2
DD
2
EE
2
HH
4
1
II
JJ
1
JJ
CC
4
C
H
WWW.HOMEDEPOT.CA.
Advertisement
