Page 2
The information in this manual may be subject to change without prior notice. ccGEN2 is a registered trademark of Universal Remote Control, Inc. URC - Control the Experience is a registered trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
ABLE ONTENTS Introduction Features and Benefits Parts Guide Front and Rear Panel Descriptions Network Installation Specifications Limited Warranty Statement End User Agreement Federal Communication Commission Interference Statement Declaration of Conformity...
RFTX-1 transmitter. Features and Benefits ● Expand Control Add an AC-1 to a ccGEN2 system and expand control to other rooms/areas in the home or office. Components located out of reach from the CP-1 Central Processor may be controlled via IR, RS-232 or Relays by using an AC-1.
Sensor: Illuminates to indicate when the sensor is activated. Ethernet: Illuminates when connected to an active network. Reset: Press the reset button located under the AC-1 to restart the unit. Pressing and holding the reset button for 15 seconds factory defaults the unit.
Page 7
Sensor: Connect with one of URC’s or compatible third party, sensors. IR IN: Allows AC-1 control from a wireless controller such as a WC-1. Note: IR Routing is lost from commands received from this input. IR Outputs: Connect emitters for IR control of connected devices.
AC-1 A UXILIARY ONTROLLER Network Installation The AC-1 can be installed in a ccGEN2 system. Connect the Ethernet cable (RJ45) to the rear of the AC-1 and the other end to a Router. AC-1 Router Page 5...
RS-232: Two RS-232 ports support TX, RX and GND two way communication via URC cables. IR: Six adjustable IR ports enable the included URC emitters to control IR devices Note: 6th IR Output requires the included sleeved emitter (identified by a pink connector), since it can optionally be used to connect an RFTX-1.
WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE OR THAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE. URC warrants that at the time of purchase the URC equipment and the URC software complied with all applicable regulations and policies of the Federal Communications Commissions (“FCC”) regarding electromagnetic...
Page 11
In the event of any warranty claim, URC will, at its sole option, repair the URC equipment using new or comparable rebuilt parts, or exchange the URC equipment for new or rebuilt equipment.
OF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO DATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS.
AC-1 A UXILIARY ONTROLLER Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
AC-1 A UXILIARY ONTROLLER Declaration of Conformity Company Name OH SUNG ELECTRONICS CO., LTD. Company Address #181 GONG DAN-DONG, GUMI, GYEONG BUK, REPUBLIC OF KOREA Contact Information Phone: +82-54-468-7281, Fax: +82-54-461-8368 Brand Name UNIVERSAL remote control Product Name Auxiliary Controller...
Need help?
Do you have a question about the AC-1 and is the answer not in the manual?
Questions and answers