White Balance; Playing Back - Panasonic NV-GS11 Operating Instructions Manual

≥If this mode is used for indoor recording,
playback images may flicker.
Low Light Mode
≥Extremely dark scenes may not be able to
be made brighter to a satisfactory degree.
Spotlight Mode
≥With this mode, recorded images may
become extremely dark.
≥If the recording subject is extremely bright,
its recorded image may becomes whitish.
Surf & Snow Mode
≥If the recording subject is extremely bright,
its recorded image may turn out to be
whitish.
ª White Balance
In the following cases, you cannot change

White Balance:

≥When you set [EFFECT2] to [SEPIA] or to
[B/W].
≥When you set the Zoom to higher than 24k
≥During Digital Still Picture Mode
≥When you display a Menu
≥When you use the Night View Mode
In the following cases, the [1] Indication
flashes:
≥The flashing indicates that the previously
adjusted White Balance setting is still kept. This
setting will be kept until White Balance is
adjusted again.
≥You may not be able to achieve correct White
Balance Adjustment manually under weak
illumination.
ª Manual Shutter Speed Adjustment
≥You may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject.
≥During normal playback, movement in the
images may not look smooth.
≥Because the colour and brightness of the
playback image may become unstable, avoid
recording under fluorescent light, mercury light
or sodium light.
≥If you are using Night View Mode (
Programme AE Mode (
the shutter speed.
ª Manual Iris Adjustment
≥Depending on zoom magnification, there are iris
values that will not be displayed.
≥If you are using Night View Mode (
Programme AE Mode (
the iris.
≥If you attempt to adjust the Shutter Speed after
setting the Iris, the value set for the Iris will be
cancelled.
) or
-24-
), you cannot adjust
-25-
) or
-24-
), you cannot adjust
-25-
Others
ª Digital Effect Functions
≥If you have set [EFFECT2] to [B/W] or [SEPIA],
changing the selected White Balance Mode is
not possible. (
≥Setting the Cinema Mode cancels the
Picture-in-Picture Mode and the Multi-Picture
Mode.
≥During the Digital Still Picture Mode, the Digital
Effect Functions cannot be set.
In the following cases, using the [EFFECT1]
on the [DIGITAL] Sub-Menu is not possible.
≥When the Night View Mode is set (
≥When the Built-in LED Video Light lights and the
Gain Up mode is set to on.
In the following cases, using the Digital Effect
Function is not possible.
≥Title In
Wipe Mode and Mix Mode
If the following operation is carried out, stored
images will be erased, and Wipe and Mix
Functions cannot be used.
≥Set other item of Digital Effect
≥Operate the [OFF/ON] switch or Mode Dial
≥Insert or eject a cassette
Picture-in-Picture Mode
≥If Mode Dial is operated, the smaller picture
disappears.
≥Titles cannot be inserted into the smaller
picture.
Multi-Picture Mode
≥If the [MULTI] Button is pressed while
self-recording Mirror Mode (
picture is displayed from the upper right corner
of the screen, but, in reality, the picture is
recorded from the upper left corner as usual.
≥The quality of Multi images deteriorates slightly.
≥The top and bottom of the Multi pictures will be
cut off slightly.
ª Playing Back
Repeat Playback
If you continue to press the [1] Button for
5 seconds or longer, the Movie Camera switches
to Repeat Playback Mode, and the [R !]
Indication appears. (To cancel Repeat Playback
Mode, set the [OFF/ON] Switch to [OFF].)
Listening to Playback Sound through
Headphones
If you want to use the headphones to listen to the
playback sound, set [AV JACK] on the
[AV IN/OUT] or [INITIAL] Sub-Menu to
[OUT/PHONES] and connect the headphones to
the [PHONES] Socket (
In this case, no sound (including warning and
shutter sounds) will be reproduced through the
built-in speaker of the Movie Camera.
-50-
)
-26-
) is used, the still
-19-
) on the Movie Camera.
-6-
)
-24-