Recording In Natural Colours; Adjusting White Balance Manually - Panasonic NV-GS11 Operating Instructions Manual

≥For recording a subject under a spotlight in
a party, theatre, etc.
5) [º] Surf & Snow Mode
≥For recording in a glaring surrounding, such
as ski slopes, beaches, etc.
To Cancel the Programme AE Function
Set the [PROG.AE] on the [CAMERA] Sub-menu
to [OFF]. Or, set the [AUTO/MANUAL/FOCUS]
Switch to [AUTO].
≥For other notes concerning this item, see

Recording in Natural Colours

(White Balance)
Depending on the scene or lighting conditions,
the Automatic White Balance Adjustment Mode
may not be able to bring out natural colours. In
this case, the white balance can be adjusted
manually.
When the Movie Camera is turned on with the
Lens Cap on, the Automatic White Balance
Adjustment may not function properly. Please
turn on the Movie Camera after removing the
Lens Cap.
1
Set the [AUTO/MANUAL/FOCUS] Switch
(21) to [MANUAL].
(21)
AUTO
MANUAL
FOCUS
≥The [MNL] Indication appears.
2
Press the [ENTER] Button
(19)(17)(16)
≥The [AWB] Indication appears.
3
Press the [5] Button
(19)
to select a desired White Balance
Mode.
1)
1AWB
3)
1
1) Automatic White Balance Adjustment [AWB]
2) The white balance setting that was previously
set manually [1]
3) Outdoor Mode [z]
Recording Mode
-49-
(17) .
(16) or [6] Button
2)
1
4)
1
4) Indoor Mode (recording under incandescent
lamp) [{]
To Resume Automatic Adjustment
Press the [5] Button
until the [AWB] Indication appears. Or, set the
[AUTO/MANUAL/FOCUS] Switch to [AUTO].

Adjusting White Balance Manually

White Balance Adjustment recognizes the colour
of light and adjusts so that white will appear pure
.
white. The Movie Camera determines the hue of
light that comes through the Lens and White
Balance Sensor, thereby judging the recording
condition, and selects the closest hue setting.
This function is called Automatic White Balance
Adjustment.
For light outside the functional Auto White
Balance Adjustment range, use the Manual White
Balance Adjustment Mode.
1
Set the [AUTO/MANUAL/FOCUS] Switch
(21)
to [MANUAL].
FOCUS
≥The [MNL] Indication appears.
2
Point the Movie Camera at a full-screen
white subject.
3
Press the [ENTER] Button
(19)(17)(16)
≥The [AWB] Indication appears.
4
Press the [5] Button
(19) until the [1] Indication is displayed.
5
Keep pressing [ENTER] Button
[1] Indication stops flashing.
To Resume Automatic Adjustment
Press the [5] Button
until the [AWB] Indication is displayed. Or, set the
[AUTO/MANUAL/FOCUS] Switch to [AUTO].
-26-
(16) or [6] Button
(21)
AUTO
MANUAL
(17)
.
(16)
or [6] Button
MNL
1
(16) or [6] Button
(19)
(17) until the
(19)