Sunnydaze Decor 73643-FC Quick Start Manual

3 - TIER FLOWER BLOSSOM WATER FOUNTAIN
Read the assembly instructions carefully and follow the care instructions. Keep these instructions for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Note: When first used, there may be air in the pump. It may take several minutes for the air to escape and water begins to flow.
Additional water may need to be added once the pump circulates water into the upper tiers.
73643-43"
Purchase Date: /
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
73643-FC
Select a smooth, level surface to place the fountain.
Parts
Fountain Topper
Top Tier
Middle Tier
Column
Bottom Tier
Pedestal
Electric Submersible Pump
Pump Access Cover

ASSEMBLY

1. Place the bottom tier onto the pedestal, twist to lock in place.
2. Place the electric submersible pump in the center of the bottom tier
and run the power cord through the built-in pipe and out the bottom
of the pedestal, ensuring the power cord is beneath the groove on
the bottom of the pedestal.
3. Place the column on the bottom tier, twist to lock in place.
4. Place the middle tier on the column, twist to lock in place.
5. Run the water tube that is built into the topper through the top tier,
twist to lock the topper onto the top tier.
6. Run the water tube through the middle tier, twist to lock the top
assembly to the middle tier.
7. Connect the water tube to the electric submersible pump and install
the pump access cover.
8. Fill the bottom tier with enough water to fully submerge the pump.
Additional water will need to be added once the pump
NOTE:
circulates water into the upper tiers.
9. Plug the power cord into a properly grounded GFCI outlet.
10/2020
/ Order/Customer Reference Number:
Qty.
1
1
1
NOTE:
1
fountain topper. Gently and carefully
1
uncoil the water tube from inside the
1
topper. Take care when handling the
water tube; detaching the water tube
1
from the fountain will damage the
1
fountain and void the product warranty.
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
The water tube is built into the
Page 1 / 2