Table of Contents
Advertisement
Technical specifications
5.2 Technical specifications of the CM (6GK7542-5DX10-0XE0)
5.2
Technical specifications of the CM (6GK7542-5DX10-0XE0)
You will find the product functions in the section Configuration limits and performance data
(Page 13).
In the preface, "Guide to documentation" section, note the information in the SIMATIC S7-
1500 System Manual (Page 3).
In addition to the information in the system description, the following technical specifications
apply to the module.
Technical specifications - 6GK7542-5DX10-0XE0
Product name
Article number
Connection to PROFIBUS
•
Quantity
•
Design
•
Transmission speed
Electrical data
Power supply
•
Via S7-1500 backplane bus
Current consumption (typical)
•
From backplane bus
Effective power loss (typical)
Overvoltage category according to
IEC / EN 60664-1
Permissible ambient conditions
Ambient temperature *
Relative humidity
Permitted contaminant concentration Corrosive gas test according to ISA-S71.04 severity level G1, G2, G3
Design, dimensions and weight
Module format
Degree of protection
Weight
Dimensions (W x H x D)
Mounting type
* Also read the information in the Ambient temperature (Page 57) section.
56
CM 1542-5
6GK7 542-5DX10-0XE0
1 x PROFIBUS interface
D-sub socket (RS485)
9.6 kbps, 19.2 kbps, 45.45 kbps, 93.75 kbps, 187.5 kbps, 500 kbps, 1.5 Mbps,
3 Mbps, 6 Mbps, 12 Mbps
15 V
200 mA
3 W
Category II
During operation with the rack
installed horizontally
During operation with the rack
installed vertically
During storage
During transportation
During operation
Compact module S7-1500, single width
IP20
250 g
35 x 147 x 129 mm
Mounting in S7-1500 rack, S7-1500 mounting bar installation
-25 °C ... +60 °C, without condensation or
ice
-25 °C ... +40 °C, without condensation or
ice
-40 °C ... +70 °C
-40 °C ... +70 °C
≤ 95 % at 30 °C, no condensation
Operating Instructions, 01/2023, C79000-G8976-C290-07
SIMATIC CM 1542-5
Advertisement
Table of Contents
