Switching Off And Retracting The Power Cable - Dirt Devil Royal CENTRINO SX Operating Manual

Cylinder vacuum cleaner
Table of Contents

Advertisement

Available languages

Available languages

3 Operating
3
2
1
1
1
3.2 Switching off and
retracting the power
cable
1. Push on the desired nozzle,
nozzles (accessories)".
2. Remove the cable, by holding the plug, until the yellow
mark is reached (Fig. 11/1).
WARNING:
If the red mark (Fig. 11/2) is visible, then retract the cable
again until it is no longer visible,
Fig.11
"Switching off and retracting the power cable". Otherwise
the cable can break off. There is a risk of electric shock.
3. Switch on the cylinder vacuum cleaner using the on/off
switch (Fig. 11/3).
4. Adjust
depending on the type of flooring:
- Hard floor (Fig. 12/a)
a
Laminate flooring, tiles, PVC flooring, etc.
- Carpet (Fig. 12/b)
b
Long and short pile carpets, runners, etc.
Fig.12
5. To vacuum, pull the cylinder vacuum cleaner behind
you like a sledge. When vacuuming, observe the
corresponding
manufacturer.
NOTE:
You can quickly reduce the suction power with the
secondary air controller (Fig. 13/1) if less suction power
is required or e. g. to release objects that have been
Fig.13
sucked in.
1. Switch off the cylinder vacuum cleaner using the on/off
switch (Fig. 11/3) and pull the plug out of the socket.
2. Keep the plug in your hand.
1
WARNING:
The power cable can whip around when being pulled in,
it can also trip you or somebody else up or knock down
objects.
3. Press the cable retract button (Fig. 14/1) to pull in the
Fig.14
power cable.
Chapter 2.3, "Using other
the
carpet/hard
floor
recommendation
Chapter 3.2,
switch
(Fig. 12/1)
of
the
flooring
25

Advertisement

Chapters

Table of Contents
loading

Table of Contents