Table of Contents
Advertisement
The turbine has two eye bolts atop the mainframe. Ideally a separate strap is
attached to each eye bolt. It has been reported when picked in this manner the
tower adapter does not "sit" parallel with the tower top. A chain hoist can
provide for fine adjustments.
Blades should not be
installed yet. However, take
note of blade orientation,
with one blade straight up
REV 0.1
RIGGING THE TURBINE FOR THE LIFT
Lift Weight: ~1,350 LBS
Tag line to
control
turbine
swing
Page 15 of 28
Advertisement
Table of Contents
