Elecrical Transformer Required - Bergey XL-15 Installation Quick Manual

ELECTRICAL TRANSFORMER REQUIRED
This configuration is typical for a grid tied system that is not a standard 240VAC. A
25KVA transformer is sized appropriately. A number of manufactures make
transformers that are suitable for installation. For this example we will use the
single phase transformer from Maddox.
208 – 120/240: MIT-DRY-224 (25 KVA)
240 / 480 – 120/240: MIT-DRY – 120 (25 KVA)
NOTE: The 120A fused disconnect is not mandatory but could be required by local
code.
Page 8 of 28
REV 0.1