Locking Your Communicator - Palm Treo 270 User Manual

4. Do one of the following:
To change the password, enter the new password, and hold Option
Return .
To delete the password, tap Delete.

Locking your communicator

You can also lock your communicator so that you need to enter your password to operate it.
Important: If you lock your communicator, you must enter the exact password to re-activate
your communicator. If you forget the password, you need to perform a hard reset to
resume using your communicator. Performing a hard reset deletes all the records
in your communicator; however, you can restore all previously synchronized data at
the next HotSync operation. See page 215 for details.
To lock your communicator with a password:
1. Assign a password.
2. Tap Lock & Turn Off.
3. Tap Off & Lock.
4. To start your communicator, turn it on, and then enter the password.
Page 48
Tap Lock &
Turn Off
and press
Managing Your Applications