SELFSAT CARAVAN MOBIL User Manual page 11

4
5
GP-1a:db:9c
Basic Features
Settings button
Firmware version, language setting can be checked.
Status display window
Indicates the current status of the antenna.
Satellite selection window
Select a satellite to search. The pre-programmed satellite is ASTRA1,
which can be changed to the desired satellite via the APP.
Used to move the antenna to the HOME position
The orange lamp blinks while moving to the HOME position, and the
green lamp turns on after it has completely moved to the HOME position.
Used for searching satellites
Select the desired satellite and press the button, the antenna will search
for it. While searching for a satellite, the orange lamp flashes, and when
a satellite is found, the green lamp lights up.
F/W Update
Used to update the firmware of the antenna.
During a firmware update stay close to your PI BOX, make sure that your
smartphone or tablet will not run out of battery, don´t use any other
apps in parallel and don´t do any calls in order not to lose or interrupt
the connection and to completely finish the upload. In case the
firmware update couldn´t be fully uploaded and finished your antenna
needs to be sent to the service center.
Settings page
Check the firmware version of the antenna and mobile app.
Can delete the MAC address of a registered product. To register a new
product, return to the available devices.
Can change the language of the app to the language you use.
ENGLISH - 10