LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual
Figure 4-14 Installing copper bars between battery packs
When installing copper bar C, keep away from communications cables and fan
power cables of battery packs to prevent cables from being squeezed.
Step 4 After installing the copper bars, close the battery pack cover.
Step 5 Close the battery cabin door.
----End
4.3.3 Filling the Fire Cylinder with Extinguishant
Issue 02 (2021-11-15)
NO TE
Three types of copper bars are included with the equipment and are identified by the
silkscreens A, B, and C printed on the front.
CA UTION
NO TE
This step applies only to the scenario where fire cylinders are used.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
83