Huawei iBattery 3.0 User Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Camera Accessories
  5. iBattery 3.0
  6. User manual
Huawei iBattery 3.0 User Manual

Huawei iBattery 3.0 User Manual

Hide thumbs Also See for iBattery 3.0:
Table of Contents

Advertisement

Quick Links

Download this manual
iBattery 3.0
User Manual
Issue
07
Date
2019-12-30
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iBattery 3.0 and is the answer not in the manual?

Questions and answers

Related Manuals for Huawei iBattery 3.0

Summary of Contents for Huawei iBattery 3.0

  • Page 1 3.0 User Manual Issue Date 2019-12-30 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...

  • Page 3: About This Document

    User Manual About This Document About This Document Purpose This document describes the iBattery 3.0 in terms of its features, installation, networking, and maintenance. Figures used in this document are for reference only. Intended Audience This document is intended for: ...
  • Page 4 Updated the section "iBAT Networking Failure." Issue 03 (2019-01-02) Update iBOX WebUI. Issue 02 (2018-05-10) Added the scenario where the iBOX connects to the ECC800. Issue 01 (2018-03-20) This issue is the first official release. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 5: Table Of Contents

    5.4 Setting Parameters for the Scenario Where the iBOX Connects to the NetEco ............51 5.5 Networking the iBOX and iBAT ...........................55 5.5.1 Serial Networking ..............................56 5.5.2 Parallel Networking ............................57 5.6 iBAT Networking Configuration ...........................59 5.7 Setting iBAT Blinking ............................62 Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 6 8.3.7 All iBATs Related to the iBOX Cannot Be Connected to the Network ..............78 8.3.8 iBAT Communication Failure ..........................78 8.3.9 SOC Exception ..............................79 A Technical Specifications ....................... 80 B Acronyms and Abbreviations ....................82 Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 7: Safety Precautions

    When operating Huawei equipment, strictly follow the precautions and safety instructions. The safety precautions given in this document do not cover all the safety precautions. Huawei will not be liable for any consequence caused by the violation of the safety operation regulations and design, production, and usage standards.

  • Page 8: Local Laws And Regulations

    AC mains supply, which stated in instruction. 1.3 Basic Installation Requirements The iBattery for data centers can be commissioned and maintained only by Huawei engineers or engineers certified by Huawei. Otherwise, personal injury or equipment damage may occur. Huawei equipment can be installed, operated, and maintained only by persons who have been trained on safety precautions and have mastered the correct methods.
  • Page 9 This product should be installed and used as required by specifications in this manual. Otherwise, the product may be damaged, and the resulting product malfunctions or damaging components are beyond the warranty scope. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 10: Overview

    The iBOX receives commands such as board reset, internal resistance measurement, and alarm indicator light-on from the upper-layer management unit (such as the UPS). The upper-layer management unit records the logs. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 11 (10) Networking switch (11) PWR indicator (12) RUN indicator (13) ALM indicator (14) RF_Z indicator (15) Delivered antenna Figure 2-2 iBOX bottom (1) Fastener (2) Micro SD card (3) Default button Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 12 In this scenario, an external power module is adopted to supply 12 V DC operating voltage. Table 2-2 –48 V, 0.5 A port pin definitions Definition Description The system provides 48 V DC operating voltage in this scenario. – Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 13 Supports power supply through the POE port. The terminal is an RJ45 terminal with an indicator. TX– 4, 5 P45_P1 RX– 7, 8 P78_P1 COM Port Figure 2-5 COM port pins Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 14 Dry contract  Open: The dry contact Open output signal output is open.  Closed: The dry contact output is closed. HALL Current Monitoring Port Figure 2-6 HALL current monitoring port pins Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 15 The battery breaker circuit breaker is  Disconnect ed: The battery circuit breaker is OFF. Controls battery  0 V: There circuit breaker is no trip and outputs driving Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 16 0 V: There is trip and receives 12 V driving no driving signals signal for BCB tripping. Secondary side ground  12 V: There is a driving signal for BCB tripping. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 17 1. Check whether Blinking Communication at short fails. (No communicatio intervals legitimate n cable is northbound data loose. has been received for 3  If yes, minutes.) reconnect Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 18 Blinking intermittently at super short intervals means an indicator blinks at super short intervals for 0.5s and then remains off for 0.5s. Networking Switch Table 2-11 Networking switch description Name Definition Function Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 19: Ibat

    After networking is complete, when the iBAT detects that the battery voltage is lower than 12.6 V for 50 hours, the iBAT automatically powers off.  Supports the serial port function. For details, contact Huawei technical support. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 20 Definition Description BAT_V+ and BAT+ are used for connecting red wires to positive battery terminals. BAT_V– and GND are NTCA used for connecting black wires to negative battery terminals. NTCB BAT+ Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 21 The iBAT is measuring the battery internal resistance.  The iBAT is faulty.  Communication with the iBOX times out.  No network is connected. (The iBAT is waiting to connect to a Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 22 If an indicator blinks at short intervals, it is blinking at 4 Hz, that is, on for 0.125s and then off for 0.125s.  If both the red and green indicators light up at the same time, orange effect may be generated. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Installing Devices

    Battery layer requirements: The battery layer should have a gap greater than 70 mm on both left and right sides. 3.1 Tools and Instruments Use insulated tools to avoid electric shocks. This section lists the tools and instruments required for installation. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 24 Multimeter Network cable tester Label NOTE This table may not list some tools required at specific sites. Site installation personnel and technical support personnel should prepare tools based on site requirements. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 25: Installing The Ibat

    Procedure Step 1 Open the battery string switch. Connect the positive and negative iBAT cables respectively to the positive and negative wiring terminals or poles of the battery. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 26 Install a battery bolt in the following sequence: bolt > spring washer > flat washer > OT terminal > battery connecting piece. Step 2 Strip the adhesive tape from the iBAT fastener. Attach the iBAT and press it for more than 10s. Figure 3-3 Securing an iBAT Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 27: Installing The Ibox

    Figure 3-4 Connecting an iBAT ----End 3.3 Installing the iBOX Context Figure 3-5 iBOX installation position in a battery cabinet (1) Hall effect sensor (2) iBOX (3) Battery control I/O board (BIB) Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 28 Step 3 Attach the fastener to the positioning frame of the fixing bracket, press the fastener for more than 10 seconds, and ensure that the fastener is attached firmly and evenly. Step 4 Mount the iBOX onto the fastener and ensure that the iBOX is securely installed. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 29 3.0 User Manual 3 Installing Devices Figure 3-7 Fastener installation position (1) iBOX fixed mount (2) Bounding frame (3) Fastener Figure 3-8 Installing an iBOX ----End Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 30: Installing Hall Effect Sensors

    Step 1 Route the positive and negative battery string cables through the Hall effect sensors. Step 2 Secure Hall effect sensors to the positive and negative battery string cables. Figure 3-9 Installing Hall effect sensors (battery string with a neutral wire) Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 31 Hall effect sensors on battery string 2 to the iBOX in the same way, and so on.  Battery string with a neutral wire Figure 3-11 Cable connections to Hall effect sensors (1) Cable Label iBOX Port Battery1+_HALL1 HALL_1 Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 32 Figure 3-12 Cable connections to Hall effect sensors (2) Cable Label iBOX Port Battery1+_HALL1 HALL_1 Battery1+_HALL2 HALL_2 Battery1–_HALL3 HALL_3 Battery1–_HALL4 HALL_4 Battery2+_HALL5 HALL_5 Battery2+_HALL6 HALL_6 Battery2–_HALL7 HALL_7 Battery2–_HALL8 HALL_8  Battery string without a neutral wire Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 33 Battery2_HALL2 HALL_2 Battery3_HALL3 HALL_3 Battery4_HALL4 HALL_4 Figure 3-14 Cable connections to Hall effect sensors (2) Cable Label iBOX Port Battery1_HALL1 HALL_1 Battery1_HALL2 HALL_2 Battery2_HALL3 HALL_3 Battery2_HALL4 HALL_4 Battery3_HALL5 HALL_5 Battery3_HALL6 HALL_6 Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 34: Installing Adapter

    Step 3 Knock 6x30 plastic expansion sleeves into the mounting holes using a rubber mallet. Step 4 Secure the adapter using ST3.5x35 tapping screws and washers to a torque of 0.3 N· m. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 35 Prepare a straight-through cable and socket by yourself.  The socket and plug appearances are for reference only. The actual objects prevail.  The adapter obtains power preferentially from the UPS AC output. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 36: Connecting Cables

    3.6 Connecting Cables 3.6.1 Scenario Where the iBOX Connects to the UPS Context The following uses the scenario where the battery string is configured with a neutral wire as an example. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 37 3.0 User Manual 3 Installing Devices Figure 3-17 Scenario 1 where the iBOX is connected to the UPS (one UPS is configured with one iBOX to manage four battery strings) Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 38 Figure 3-18 Scenario 2 where the iBOX is connected to the UPS (one UPS is configured with four iBOXs to manage four battery strings respectively) Procedure Step 1 Connect the iBOX communications cable. Prepare an RS485 cable by yourself. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 39 Toggle Toggle Toggle Toggle Corresponding Switch 1 Switch 2 Switch 3 Switch 4 iBOX Address (ADDR_1) (ADDR_2) (ADDR_3) (ADDR_4) in the MDU iBOX 1 iBOX 2 iBOX 3 iBOX 4 Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 40: Scenario Where The Ibox Connects To The Ecc800

    The communications cable, with an RJ45 connector, delivered with the BCB box is used to connect the new BIB board, and the cable without an RJ45 connector is used to connect the old BIB board. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 41 Figure 3-23 Connecting the iBOX signal cables (old BIB board) Table 3-3 Mapping relationship of ports BIB J1 Signal Port iBOX BCB Signal Port 5 OL 6 STA 7 DRV 8 GND Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 42: Scenario Where The Ibox Connects To The Neteco

    Scenario 2: If the LAN switch does not provide the POE function, the iBOX obtains power from the adapter through the POE port and connects to the FE port on the LAN switch through the DATA port on the adapter. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 43 Figure 3-25 Scenario 1 (One LAN switch configured with one iBOX to manage four battery strings, old BIB board) Table 3-5 Mapping relationship of ports BIB J1 Signal Port iBOX BCB Signal Port 5 OL 6 STA 7 DRV 8 GND Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 44 Figure 3-26 Scenario 1 (One LAN switch configured with one iBOX to manage four battery strings, new BIB board) Table 3-6 Mapping relationship of ports BIB J1 Signal Port iBOX BCB Signal Port 5 OL 6 STA 7 DRV 8 GND Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 45 For details about how to connect a cable between the BIB and the iBOX, refer to scenario 1. Procedure Step 1 Connect the cable between the iBOX and the LAN switch. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 46: Installation Verification

    All DIP switches on iBOXs are correctly set. Positive and negative iBAT input Use a multimeter to check that the voltage power cables between the positive and negative iBAT input power cables is correct. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 47 3.0 User Manual 3 Installing Devices Check Item Acceptance Criteria Operating environment Conductive dust and other foreign matter are cleaned up from the installation environment. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 48: Webui Description

    SOH, and the voltage, SOC, and temperature of a single battery string.  Controls iBOX blinking, internal resistance measurement, iBAT reset, iBAT blinking, and networking configuration. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 49 Views electronic labels. User Adds, modifies, or deletes users. Management Fault Exports logs and fault data. Information Maintenance Selects an RF channel and sets a coefficient for internal Config resistance calibration. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 50: System Commissioning

    The default settings of the IP address, subnet mask, and gateway for the iBOX are as follows:  IP address: 192.168.0.10  Subnet mask: 255.255.255.0  Gateway: 192.168.0.1 Procedure Step 1 Connect a straight-through cable from the PC network port to the DATA port on the adapter. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 51 Step 2 Open Internet Explorer, and choose Tools > Internet Options. Step 3 Select the Advanced tab page, ensure that Use TLS 1.1 and Use TLS 1.2 have been selected, and click OK. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 52 The operation does not affect web functions but has potential risks. Therefore you are advised to update the security certificate promptly.  If the browser on the PC is abnormal, clear the browser cache and open the browser again. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 53: Setting Parameters For The Scenario Where The Ibox Connects To The Ups

    Step 6 On the Battery Curve page, select the battery string to be set, set Battery Brand and Format, click Filter > Submit. Figure 5-4 Battery Curve ----End 5.2 Setting Parameters for the Scenario Where the iBOX Connects to the UPS Context Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 54 On the UPS LCD home screen, choose System Info > Settings > iBOX Settings, and set Basic Param., Advanced Param., and Batt. String Config. Figure 5-5 iBOX Settings Figure 5-6 Basic Param. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 55 0 or a value same as the UPS Address. Current source Specifications of the Hall effect sensor used to detect iBOX current. Batt. abnormal BCB If the BCB box is configured, set Batt. abnormal BCB trip to Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 56: Setting Parameters For The Scenario Where The Ibox Connects To The Ecc800

    Step 1 Log in to the ECC800 WebUI as an administrator. Step 2 Choose Monitoring > Power Distribution > iBOXn > Running Parameters. Step 3 Set the following parameters and retain default values for other parameters. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 57: Setting Parameters For The Scenario Where The Ibox Connects To The Neteco

    5.4 Setting Parameters for the Scenario Where the iBOX Connects to the NetEco Procedure Step 1 Set iBOX parameters. On the iBOX WebUI, choose System Settings > Batt. String Config, and set Batt. String Config. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 58 Sets the battery string numbers of the iBOXs connected in parallel to unique ones when multiple iBOXs are connected in parallel. On the iBOX WebUI, choose System Settings > Running Parameter, and set Running Parameter. Figure 5-11 Running Parameter Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 59 If a BCB box is configured, set BCB configuration to Done and Batt. abnormal BCB trip to Enable. On the System Settings page, set Time, IP Address, Battery Curve and Parallel Net Join Config. Figure 5-12 Time Figure 5-13 IP Address Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 60 Step 4 Drag the battery detector icon to the creation area. On the Management Info pane, set the Name, IP Address, Port, and Connection Mode for the iBOX. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 61: Networking The Ibox And Ibat

    An iBAT hibernates automatically under the following conditions:  The iBAT has failed to communicate with the iBOX for more than 30 minutes.  The iBAT has not been networked successfully more than two days after power-on. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 62: Serial Networking

    Blinking at long intervals: The indicator is on for 1s and then off for 1s alternately.  Blinking at super short intervals: The indicator is on for 0.05s and then off for 0.05s alternately. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 63: Parallel Networking

    Before networking, ensure that all the iBOXs and iBATs have no network parameters, that is, the RF_Z indicator on the iBOX is steady green and the RUN/ALM indicator on the iBAT is steady red. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 64 Enable, and separately press the networking switch for 2 seconds on the iBOX and on the iBAT for which the network parameters have been cleared when the iBOX network parameters are cleared, to complete the networking again. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 65: Ibat Networking Configuration

    Example: There are three iBATs in the network and they are numbered 1, 2, and 3. Choose Insert an iBAT and set Reference No. to 2. After the operation, number 2 is reserved, and the iBAT numbers 2 and 3 change to 3 and 4 respectively. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 66 Replace an iBAT and set Reference No. to 2. After the operation, the network parameters of the number 2 iBAT are cleared, and number 2 is reserved. Figure 5-21 Schematic diagram Deleting an iBAT Figure 5-22 Deleting an iBAT Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 67 Choose Batch-replace iBAT, set Start No. to 2, and set End No. to 5. After the operation, the network parameters of the number 2–5 iBATs are cleared, and numbers 2–5 are reserved. Figure 5-25 Schematic diagram Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 68: Setting Ibat Blinking

    The iBAT starts blinking after the time specified by Switch on delay time. If Switch on delay time is set to 0, the iBAT starts blinking immediately. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 69 3.0 User Manual 5 System Commissioning Figure 5-28 Blink control Control the iBAT to blink. If the iBAT blinks successfully, it is connected normally. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 70: Battery Test

    The voltage displayed on the WebUI is in the range of the measured voltage ± 0.2%.  The temperature displayed on the WebUI is in the range of the measured temperature ± 1° C.  The internal resistance value is displayed for each battery. ----End Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 71: Capacity Test

    2% of the Hall effect sensor specification (for example, the difference is less than 4 A for a 200 A Hall effect sensor), the system cable connections are proper. ----End Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 72: Troubleshooting

    Step 2 On the WebUI, choose Maintenance > Fault Information, and export fault information. Figure 7-2 Fault Information page Step 3 On the WebUI, choose Query > Export Data, and export historical data. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 73: Alarm Reference

    UPS meet the battery charge overcurrent. requirements. 2. Check that new and old batteries are not connected in parallel in each battery string. Mark abnormal battery strings. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 74 2. Compare the internal resistance of the abnormal battery and that of the normal battery. Mark abnormal batteries. 3. Compare the discharge voltage of the abnormal battery and that of the normal battery. Mark abnormal batteries. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 75 1. Check that battery terminal screws are Single Batt. Critical  A battery terminal tightened. terminal off screw is not tightened. 2. Check that battery terminals are properly  A battery terminal is Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 76 Batt. abnormal BCB trip are set to Enable in the UPS MDU, when a Single Batt. terminal off alarm is raised, the system automatically controls the BCB to disconnect.  If the fault persists, contact Huawei technical support. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 77: Maintenance

    Ambient temperature The ambient temperature Find the cause of an abnormal monitoring should be lower than 45° C. temperature. If the fault persists, contact Huawei technical support. 8.1.2 Quarterly Maintenance Table 8-2 Routine maintenance items Item Expected Result Troubleshooting Battery management Check that the battery Set parameters correctly.

  • Page 78: Component Replacement

     The cable to the HALL current monitoring port is connected securely. If the fault persists, contact Huawei technical support. 8.2 Component Replacement 8.2.1 Replacing an iBOX Prerequisites  The iBOX needs to be replaced. ...

  • Page 79: Replacing An Ibat

    Step 1 On the iBOX WebUI, choose Monitoring > iBOX System > Running Control > Net Join Config, select Replace an iBAT from the Operation Type drop-down list box. Figure 8-1 Net Join Config Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 80 On the UPS WebUI, choose Monitoring > iBOX Control, set iBOX No. and iBAT No., and click Start.  On the UPS LCD, choose System Info > Maintenance > iBOX Control, set iBOX No. and iBAT No., and tap Start. ----End Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 81: Faq

    Step 2 Set Select a Device type and click Confirm. Figure 8-4 Selecting a device type Step 3 Select the name of the alarm to be disabled, set Alarm Enable to Disable, and click Submit. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 82: Ibat Networking Failure

    Step 1 If the number of incorrect iBATs is less than or equal to 3, choose Monitoring > iBOX System > Running Control > Net Join Config. Select Switch iBAT No. from the Operation Type drop-down list to adjust the iBAT sequence. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 83: Ibat Quantity Inconsistent With The Configured Value

    SN of the iBAT. If inconsistent, correct the iBAT SN and reconnect the network. Step 4 Troubleshoot other ZigBee devices such as the nearby WiFi, 3G, 4G, bluetooth, and other ZigBee devices, to remove other signal interference. Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 84: All Ibats Related To The Ibox Cannot Be Connected To The Network

    Step 4 Check whether the iBAT indicator is steady red. If yes, press the networking switch for 2 seconds to complete the networking. Step 5 Replace the iBAT with one of the same specifications, and reconnect the network. ----End Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 85: Soc Exception

    Step 3 On the iBOX WebUI, choose Monitoring > iBOX System > Battery String Running Info. Check whether a current of a battery string is displayed. If no current is displayed, check whether the Hall effect sensor is securely connected. If not, fasten it. ----End Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 86: A Technical Specifications

    Electrostatic discharge (ESD) IEC61000-4-2 Electrical fast transient (EFT) IEC61000-4-4 Radiated susceptibility (RS) IEC61000-4-3 Conducted susceptibility (CS) IEC61000-4-6 Surge immunity IEC61000-4-5 Voltage dips IEC61000-4-29 Power magnetic susceptibility (PMS) IEC61000-4-8 iBAT EMC specifications Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 87 Immunity to Radiated Electric Fields 80 MHz to 2700 MHz Test level: 10 V/m (Unmodulated, rms) IEC61000-4-2 Adapter input characteristics Item Minimum Normal Maximum Input voltage (V AC) 100 to 240 Input frequency (Hz) 50/60 Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 88: B Acronyms And Abbreviations

    I/O board conducted emission conducted susceptibility direct current energy control center electrical fast transient electromagnetic compatibility end-of-discharge electrostatic discharge Ethernet liquid crystal display monitor display module Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 89 3.0 User Manual B Acronyms and Abbreviations power over Ethernet radiated emission radiated susceptibility state of charge state of health uninterruptible power system Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.

Table of Contents