Temperature
If you are seeing NO or dashes for your outdoor readings, please try the
following steps:
1.
Hold the
+ (PLUS)
Reception Indicator
2.
If after 3 minutes the sensor still isn't connected, bring the sensor inside
next to the display and remove power from both the sensor and clock.
3.
Press any button on the clock 20 times and leave the parts sit for a few
moments with the power off.
4.
Install a new set of alkaline batteries into the sensor, then into your clock.
For additional help visit:
5.
If your outdoor data is still not appearing after these steps, please
contact our support staff via the link below.
Sensor Connected
button to search for your outdoor sensor. The
will begin to animate.
bit.ly/basic_restart
Sensor Not Connected
Search for Sensor
6