Compaq Presario 3000 Series Operation And Reference Manual page 51

Table 4-1
Configuration Parameters/LED Indicators
Parameter Parameter
(LED) Name
7 Shutdown
Delay
8 AC Input Failure
9 Sleep Mode
11-14 Reserved
15 Reset Defaults
1
Notes: Only one nominal utility voltage can be configured.
2
If model R3000j voltage defaults to 120, change the voltage to 100.
If model R3000h-NA voltage defaults to 230, change the voltage to 208.
continued
LED 16 Explanation
Status
On Enables a 5-second delay before turning
(default) off power to the output receptacles after
receiving a shutdown command from the
host.
Off Enables a 3-minute delay.
On Enables an audio alarm when the utility
(default) voltage is outside the UPS operating range.
Off Disables the audio alarm for this event.
On Enables Sleep mode.
Off Disables Sleep mode.
(default)
Reserved for future use.
On Defaults are restored
Off Configuration selected by the user
overrides defaults.
Configuration 4-5
2
.