Features Of The Programming And Diagnosis Software - Bosch ABS M4 Kit Manual

Notice
9.2.1
Bosch Motorsport
yellow Connection in progress
or
MSA Box II cannot create a connection with the ABS (e.g. ABS
switched off)
green Connection successful
red‐yellow MSA Box II is not connected to Laptop
flashing
Change between Online‐ and Offline‐Mode
When no connection exists, it is easier to operate with the diagnosis software in
online mode. Please click on the ABS‐symbol with the right mouse button to
choose between online and offline mode in the status indicator:
You can only change the status when the ABS tree is closed.
9.2 Features of the Programming and Diagnosis
Software
The following chapter introduces features of the programming and diagnosis
software.
Properties
The ABS‐ECU sends coded data to the diagnosis software. The Fps‐File decodes
this information and describes the error message as plain text. If you install the
software you get the right file, which shows the error message in plain text.
If you don´t see plain text or if there is a red colored warning, you do not have
the suitable Fps‐File to your software.
ABS M4 Manual
Programming and Diagnosis Software | 9
27 / 60