9 | Programming and Diagnosis Software
Notice
9.2.5
Notice
34 / 60
MIL shines permanent in diagnosis mode.
Repair Bleeding Wizzard
Under the "Testing" tab of the RaceABS software you will also find two buttons at
the bottom right labeled "Repair bleeding" and "Repair bleeding (Balance Bar)"
with the button "Start wizard".
While you bleed your brake system you can choose between the two programs
"Repair bleeding" and "Repair bleeding (Balance Bar)":
The Bleeding Wizzard is only for bleeding the ABS hydraulic
power unit. The Bleeding Wizzard is NOT to be used or substi-
tuted for bleeding the other parts of the brake system, like
lines and brake cylinders. Make sure to bleed these other hy-
draulic parts of the brake system after bleeding the hydraulic
aggregate with the Repair Bleeding Wizzard.
During the ABS bleeding process the brake pedal should be ac-
tuated continuously except when opening or closing brake
bleeder valves.
ABS M4 Manual
Bosch Motorsport