Page 2
F C C , C E & T E L E C C O M P L I A N C E FCC P 15.105 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
1 : C O N T R O L L E R I N F O R M A T I O N CHAPTER 1: CONTROLLER INFORMATION This document provides instructions and information designed to assist users in the hardware setup and configuration of Escort Memory Systems’ C0405-USB-01 RFID Controller.
Page 4
1 : C O N T R O L L E R I N F O R M A T I O N C0405-USB-01 C O N T R O L L E R IM EN SI ONS Figure 2: C0405 Controller Dimensions C 0 4 0 5 - U S B - 0 1 I N S T A L L A T I O N G U I D E –...
2 : C O N T R O L L E R I N S T A L L A T I O N CHAPTER 2: CONTROLLER INSTALLATION S T AL L AT I O N UI D E L I N E S •...
Page 6
2 : C O N T R O L L E R I N S T A L L A T I O N C0405-USB-01 RFID C NS TA L L IN G T H E O N T R O L L E R C0405-Series RFID Controllers can be mounted to wood or plastic fixtures.
Page 7
2 : C O N T R O L L E R I N S T A L L A T I O N Figure 4: C0405 Controller, Mounting Bracket and Hardware ATTENTION For complete operating instructions for the C0405-USB-01 RFID Controller refer to the: C0405-Series RFID Controllers - Operator’s Manual available online at: www.ems-rfid.com.
Datalogic Automation’s sole opinion proves to be defective within the scope of this Warranty. In the event Datalogic Automation is not able to repair or replace defective products or components within a reasonable time after receipt thereof, Buyers shall be credited for their value at the original purchase price.