Table of Contents
Advertisement
6.
Unroll about 30 cm of the ribbon, and place the Ribbon Module on it.
Ribbon Module
7.
Set the Ribbon Supply Roll first, then the Ribbon Take-up Roll on the Ribbon Module in place as
shown in the figure below.
Ribbon Take-up Roll
8.
Slide the Ribbon Module onto the Print Head Mechanism.
Print Head Mechanism
NOTE: Be careful of the orientation of the Ribbon Module.
9.
Slowly lower the Ribbon Module together with the Print Head Mechanism.
Ribbon
Ribbon
Ribbon Supply Roll
Ribbon Module
Ribbon Module
Ribbon Module
23
Advertisement
Table of Contents
