Installing the heat sink assembly
About this task
Steps
1. Align the heat sink assembly with screw holders and place the heat sink assembly on the system board.
2. Tighten the captive screws in a to secure the heat sink assembly to the system board .
NOTE:
Tighten the screws on the system board in the order of the callout numbers [1, 2, 3, 4].
3. Connect the cable to the connector on the system board.
Next steps
Next steps
1. Install the
front
bezel.
2. Install the
side
cover.
3. Follow the procedure in
Memory modules
Removing the memory module
Prerequisites
1. Follow the procedure in
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
35