Download Print this page

Scell-it ESSENTIAL E-312NP Operation Manual

Pneumatic rivet nuts setting tool

Advertisement

Quick Links

OPERATION MANUAL
PNEUMATIC RIVET
NUTS SETTING TOOL
E-312NP
EN
ESSENTIAL RANGE
M3-M12
ALUMINIUM - STEEL - STAINLESS STEEL

Advertisement

loading
Need help?

Need help?

Do you have a question about the ESSENTIAL E-312NP and is the answer not in the manual?

Questions and answers

Summary of Contents for Scell-it ESSENTIAL E-312NP

  • Page 1 OPERATION MANUAL PNEUMATIC RIVET NUTS SETTING TOOL E-312NP ESSENTIAL RANGE M3-M12 ALUMINIUM - STEEL - STAINLESS STEEL...
  • Page 2 ENGLISH GENERAL SAFETY INSTRUCTIONS AND PRINCIPLES READ THIS MANUAL CAREFULLY BEFORE USING THE TOOL ! It is IMPORTANT to follow the safety instructions for adequate protection against injuries. • This tool should be used exclusively • When using the tool, always •...
  • Page 3 GETTING START TO WORK Please refer to the TOOL EXPLOSIVE ILLUSTRATION and the PARTS LIST in this manual in order to have a good understanding of the tool parts described. The descriptions of the tool parts appear in this manual are in italics.
  • Page 4 MANDREL PROTRUDING SET FOR BLIND NUT 1) To set the length of the cap screw 2) Never to set the cap screw protruding length too long nor protruding out of anvil according to blind too short according to the rivet nut to be set: rivet nut length, by positioning of the locknut and anvil locking each other: STROKE SETTING...
  • Page 5 3) Checking the set stroke by initial rivet nuts setting. It is extremely important to have precise stroke setting and trial set on work piece and refer to the illustration below to see if you got a nice set up: Correctly set Not fully set Over-set.
  • Page 6: Tool Maintenance

    TOOL MAINTENANCE If there is no lubricating device connected in the air distribution, daily and before starting work, for better performance of the tool, add a few drops of hydraulic oil on the inlet of the air adaptor of the tool in order to reduce the frictions of the tool parts since the oil will be blown inside the tool when tool operates.
  • Page 7 TOOL EXPLOSIVE ILLUSTRATION E-312NP / User manual...
  • Page 8: Warranty Conditions

    Warranty is not valid if worn spare parts have to be replaced (further to a normal use of the tool). EC CERTIFICATE OF CONFORMITY – EC DIRECTIVE 2006/42/EC ANNEX II 1A The manufacturer : SCELL-IT 28 RUE PAUL DUBRULE 59810 LESQUIN FRANCE Tél.: +33(0) 320 329 818...
  • Page 9 Scell-it UK Ltd, Unit 7, Beacon Business Park, Weston Road, Stafford ST18 0DG, UK. TEL: 01785 246539 www.scellit.co.uk...

This manual is also suitable for:

Essential e-312npp