Rack Mount - Fortinet FortiSwitch 108F Series Quick Start Manual

Rack Mount

3
1
Rack mount brackets may vary as shown above
Note: The recommended clearance is 1.5 inches above and below the device.
Caution: To avoid personal injury or damage to the device, it is recommended
that two or more people mount the device on a rack.
18
(FS-108F-POE and FS-108F-FPOE only)
2
1Gbps SFP Transceivers
To install 1G SFP transceivers:
1. Slide the 1G SFP into the cage socket until it
2. Lift the latch to lock the 1G SFP
3. Connect the fiber optic cabling to the 1G SFP
2
Tx
3
Fiber Optic Cabling
To remove the 1G SFP transceivers:
1. Lower the latch to unlock the 1G SFP
2. Carefully pull the 1G SFP out of the cage socket
1
2
1G SFP
clicks into place
Cage Socket
1
Rx
Cage Socket
Latch
19