Cleaning And Maintenance - Belling BEL CHIM 603PYR User Manual

Table of Contents

Advertisement

Available languages

Available languages

CONTROLS
BEL CHIM 603PYR
BEL CHIM 603T
BEL CHIM 803T
BUTTON
LED
On
-
On
2
On
3
-
Warning: Button T1 will switch the motor to
speed 1 before stopping it.
BEL CHIM 603ANG
Icon
FUNCTIONS
Touch to turn the lighting system on
and off.
Delay: Suitable to complete
elimination of residual odours. Long
touch to activate automatic switch
off with a 5 minutes delay. It can be
activated any any time. When active
the icon of the speed is blinking.
Touch the blinking speed to disable.
Touch to start or stop the motor at
1
speed one
Touch to start or stop the motor at
2
speed two
Touch to start the motor at speed
three.
Touch a second time to activate
boost which will run for 6 minutes,
3i
after which the hood will turn off
automatically. This function is
suitable to dealing with maximum
levels of cooking fumes. To disable,
touch icon again.
FUNCTIONS
Starts the motor at
speed one
Stops the motor
Starts the motor at
speed two
Starts the motor at
speed three
Turns the lighting
system on and off
BEL CANOPY 603INT
BUTTON
FUNCTIONS
Turns the lighting system on
L
and off
Slide to set the speed:
0: Motor off
1: Low, used for continous
and silent air change in the
presence of light cooking
vapour
V
2: Medium, suitable for most
operating conditions
3. Maximum: used for
removing highest cooking
vapour emission, including
long periods
USE
• The extractor hood has been
designed exclusively for domestic
use, to eliminate kitchen odours.
• Never use the hood for purposes
other than those for which it was
designed.
• Never leave naked flames under the
hood when it is in operation.
• Adjust the intensity of the flame so
that it is directed onto the bottom of
the cooking pan, making sure it does
not engulf the sides.
• Deep-fryers must be kept under
constant supervision when in use:
overheated oil may catch fire.
CLEANING AND
MAINTENANCE
The activated charcoal filter cannot be
washed or regenerated, and must be
changed approximately every 4 months
of operation, or less in the case of
intensive use. See below diagrams on
how to install the charcoal filters.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents