Table of Contents
Advertisement
4. Remove the 4 hex head bolts hinges (5)
with an Allen wrench (5/32",4mm).
Remove the lower left and right door
hinges (6).
F
6
5
E
Disassembling the freezer drawer
There are two doors in freezer compartment,
and it provide with an upper drawer with a
tray and also a lower drawer with a tray.
A shelf is placed between the upper drawer
and the lower drawer.
You can you use below same steps to
disassemble the drawers and trays.
1. Open the freezer door; Pull up the
adjusting block (7) of the slide guides,
and pull out the freezer door drawer(8)
to the final position.
7
8
2. Take out the tray (9) by lifting it up in
the direction of the arrow.
3. Remove the screws (10) fixed on the slide
guides with a Philips (+) screw driver, and
then remove the freezer drawer (11) by
lifting it up.
4. Remove the shelf(12) by pull it out
between the beam and the slide guides.
12
Re-assemblingthe freezer drawer
To reattach the drawer after you moved
the appliance to its final location,
assemble the parts in reverse order.
9
11
10
7
Advertisement
Table of Contents
