Installing Your New Appliance - Hisense H530FI Use & Care Manual

Installing Your New Appliance

Before using the appliance for the first time,
you should be informed of the following tips.
WARNING
For proper installation, this refrigerator
must be placed on a level surface of
hard material that is the same height
as the rest of the flooring. This surface
should be strong enough to support a
fully loaded refrigerator.
The rollers, which are not casters,
should be only used for forward or
backward movement. Moving the
refrigerator sideways may damage
your floor and the rollers.
Ventilation of appliance
In order to improve efficiency of the
cooling system and save energy, it is
necessary to maintain good ventilation
around the appliance for the dissipation
of heat. For this reason, sufficient clear
space should be available around the
refrigerator.
Suggestion:
It is advisable for there to be at least
50mm of clearance from the back
of the fridge to the wall, at least
50mm of clearance from its top, at
least 12mm from its side to the
wall and a clear space in front to allow
the doors to open 125°. As shown in the
following diagrams.
50
50
12
1132
770
Note:
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
1785
956
969
5