Table of Contents
Advertisement
Leveling of appliance
For sufficient leveling and air circulating
in the lower rear section of the
appliance, the bottom feet may need to
be adjusted.You can adjust them
manually by hand or by using a suitable
spanner.
To allow the doors to self-close, tilt the
top backwards by 10-15mm.
A
Adjustable bottom
feet
B
Front roller
C
Rear roller
B
A
Adjustable bottom feet
Note:
If required you may lay the refrigerator
on its back in order to gain access to
the base, you should rest it on soft foam
packaging or similar material to avoid
damaging the backboard of the
refrigerator.
Door Removal
In case your home access door is too
narrow for the refrigerator to pass
through, remove the refrigerator doors
and drawers.
10- 15mm
C
Tools you will need(Not provided)：
Allen Wrench (5/32",4mm)
Philips Screwdriver
1.
With the door closed, remove the 3 screws
holding the top cover (1) with Philips (+)
screwdriver, and then remove the top
cover with the entireharness attached.
2.
Remove the screws (2) fixed on the hinges
with a wrench (5/16",8mm) and 1 ground
screw (3) attached to the hinge with
Philips (+) screwdriver. Remove the upper
left and right door hinges (4).
3
2
4
3. Use both hands to open the door more
than 90°. Lift it up and take it off.
Wrench (5/16",8mm)
,8mm)
1
6
Advertisement
Table of Contents
