Subscribe to Our Youtube Channel
Related Manuals for Roborock Dyad Pro
Summary of Contents for Roborock Dyad Pro
- Page 1 Roborock Dyad Pro Wet and Dry Vacuum Cleaner User Manual Read this manual carefully before using this product and store it properly for future reference.
-
Page 2: Table Of Contents
English Contents 04 Safety Information 06 International Symbols Explanation 07 FCC Statement 09 Product Introduction English 10 Product Installation Français 11 Connecting to the App Español 12 Instructions for Use 17 Routine Maintenance 20 Basic Parameters 20 Holiday Energy Saving Function 21 Common Issues... -
Page 3: Safety Information
Safety Information IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: • READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). • Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING To reduce the risk of fire, electric shock or injury: •... - Page 4 Safety Information • Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. • When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
-
Page 5: International Symbols Explanation
Safety Information Battery and Charging • Please keep the power supply and docking station away from heat (such as heating plates). • For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. •... -
Page 6: Fcc Statement
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including inter-ference that may cause undesired operation. Correspondence of the responsible party in USA Company Roborock Technology Co. Address 16192 COASTAL HWY LEWES, DE 19958 US Email support@roborock.com... - Page 7 FCC Statement Warning Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
-
Page 8: Product Introduction
Product Introduction Vacuum Cleaner Accessories Self-Clean Press: Standard mode Body Press and hold for 2s: DEEP mode Change Mode Press: Switch to AUTO/MAX/ Tray Floor Drying/ECO mode Drying & Charging Dock Maintenance Brush Power Press: Start/Pause Press and hold for 2s: Switch off Press while charging: Start/Stop drying Handle LED Display... -
Page 9: Product Installation
Product Installation Setting Up the Vacuum Cleaner Charging Dock Installation 1. Insert the handle into the vacuum body until it clicks in place. 1. Align the charging dock tray with the charging dock body, press The power button should face forwards. down, making sure they are firmly secured. -
Page 10: Connecting To The App
2. Reset WiFi. a. Keep the machine upright and press to light up the screen On the Roborock App, tap “+” on the home page, and add the and enter standby mode. device as instructed in the app. b. Press and hold until you hear the "Resetting WiFi"... -
Page 11: Instructions For Use
• The detergent cartridge requires refilling after about 20 tanks of clean water. • Remove the detergent cartridge if it is deemed unnecessary. Note: To avoid deforming the Clean Tank, only use cold water. • To prevent corrosion or damage, only use detergent recommended by Roborock. - Page 12 Instructions for Use Locking and Unlocking Starting the Vacuum Cleaner Tap the side of the cleaning head without the detergent cartridge, Unlock the cleaning head, tilt the body and press the power and push the handle to lock the cleaning head or pull the handle button to start the vacuum cleaner.
- Page 13 Instructions for Use Switching Modes Adjusting the Splash Guard Press the change mode button to switch between AUTO, MAX, You can adjust the splash guard using the lift toggle. You can Floor Drying and ECO modes. The screen will display the icon for raise it to collect large pieces of waste on the floor and lower it the current mode.
- Page 14 Instructions for Use Adding and Emptying Water 3. Pour out the dirty water. If there is any solid dirt in the tank, filter it using the filter at the bottom of the cover. When the dirty tank is full or the clean tank is empty during use, the vacuum cleaner will provide audio and visual alerts.
- Page 15 Instructions for Use Charging and Self-Cleaning Drying 1. Lock the cleaning head, and place the vacuum cleaner onto Drying starts automatically after self-cleaning is completed. To the charging dock. The voice alert "Charging" indicates that the manually start or stop drying, press the power button on the vacuum cleaner is charging.
-
Page 16: Routine Maintenance
Routine Maintenance Cleaning the Dirty Tank and Filter To maintain optimal performance of the product, refer to the following table for routine maintenance. 1. Take out the dirty tank, pull out the cover, and open the water level sensors. Clean the parts with the provided maintenance Maintenance Replacement Parts... - Page 17 Routine Maintenance 3. Allow up to 24 hours for all parts drying and install them back 4. Pinch the left and right front rollers with both hands, and pull in place. them outward. 5. Cut off any hair entangled on the rollers and remove any debris using the provided maintenance brush.
- Page 18 Routine Maintenance Cleaning the Charging Dock Tray 7. To install the front rollers, marked red and blue, on the correct sides of the head. Pinch them with both hands and align them 1. Grasp the side handles of the tray and pull upward. with the front roller shaft.
-
Page 19: Basic Parameters
Basic Parameters Body Power Supply Model WD2H1A YJS060P-3001900U, Model E060-1P300190VU Weight 4.8 kg Rated input 100–240 V~ 50–60 Hz, 1.5 A Rated power 260 W Rated output 30 V 1.9 A Rated voltage 21.6 V 21.6 V/4000 mAh (TYP) Battery Lithium-ion battery Charging time <... -
Page 20: Common Issues
There is a strange smell during use. • Clean the rollers, dirty tank, and filter. • Do not add detergent or disinfectants that are not recommended by Roborock to the clean tank, Cleaning creates a lot of bubbles. or spray such detergent or disinfectants on the floor.
Need help?
Do you have a question about the Dyad Pro and is the answer not in the manual?
Questions and answers