Rip curl FUNCTION.ANALOGUE TIDE AVERAGING Manual page 2

English
Function. Analogue Tide [Averaging]
Display
MIN.
HR.
TIDE.
To Set Time
1. Pull crown out fully to point C.
2. Turn crown to move hands to the correct time.
3. Push crown back in fully to point A.
To Set Date
1. Pull crown out to point B.
2. Turn crown clockwise to the correct date.
- Do not set the date between 9:00pm and 1:00am.
3. Push crown back in fully to point A.
Tip: if the date change occurs at 12pm, instead of 12am, the am/pm is incorrectly set. Advance
the hour hand by 12 hours.
To Set Tide
1. Find the current tide at your desired location from a trusted source.
2. Hold the TIDE SET button for 2 seconds to unlock the tide setting function.
3. Push or hold the TIDE SET button to advance the tide hand to the current tide position.
4. After 15 seconds, the tide setting function will automatically lock.
Tip: tides are generally 6 hours apart. If your chart says that high tide is 3 hours from now, set
your watch to: mid tide, rising.
A B C
CROWN
SEC.
TIDE SET
DATE