Table of Contents
Advertisement
5.1.2 Audio/Video Settings
Scart connectors: Depending on the type of
appliance connected, you can determine the type
of signal to be fed to the Scart connectors marked
"TV". Use the directional keys to select from: CVBS
(Composite/FBAS) or RGB (only for TV Scart connector).
Screen size (aspect ratio): Use the directional keys
to select the appropriate picture format for your TV
set (4:3 or 16:9), then confirm by pressing the
"OK/Menu" key.
Video/Audio out: The rear panel of the receiver
has got a Cinch connector which can be used either
to output a Video signal or a digital electrical audio
output signal. Activate the wanted output (see
connector 12 page 4).
Digital Audio out:The receiver is also equipped with two digital audio outputs (electrical and optical).
Choose one format, PCM (normal stereo) or Dolby digital (AC3 ). When Dolby digital is chosen, the receiver
will automatically detect if AC3 sound is available and will activate it on the digital audio output, if no AC3
is available the digital Audio outputs will have a classic stereo PCM signal.
RF Modulator (optional): the receiver is also available equipped with a built-in RF modulator, which
provides the facility to output the currently selected TV programme via a UHF channel. Select the audio
frequency (5,5 MHz for PAL B/C/G/H, 6,0 MHz for PAL I as well as 6,5 MHz for PAL D/K/L). Then use the
numeric keys to enter the UHF channel on which the TV image is to be transmitted.
Test image (optional): In order to find the optimum setting of the receiving channel at the TV set, a test
image can be generated.
Preferred Audio
Select in the lists the preferred Audio language, this will be automatically activated if available after
a zapping.
5.1.3 Time/Date
General Settings: If the "Automatic Time Setup" (bottom right) is set to "On", the receiver will receive the
digital clock time and date as broadcast by the digital TV programme providers, and will apply these. The
DVB standard will broadcast this in the GMT time zone. In order to display local time correctly, it may be
necessary to set a time offset, indicating the difference between local time and GMT (e.g. in Germany
daylight savings time in summer is + 2h, winter time s + 1h).
Clock mode: The time can be displayed in 12 or 24 hour format.
Automatic Time Setup: The receiver can either receive the current time via the digital TV programmes
(On), or it can calculate current time independently (Off). In this case, the current time must be selected
under "General Settings" on this page use the "OK/Menu" key), then the time must be entered manually
by using the directional keys.
16
Audio / Video Settings
TV Scart
Screen
Video/Audio
size
out
CVBS
4 : 3
RGB
16: 9
Digital
RF Modulator
Audio Out
Stereo
5.5 MHz
Dolby
6.0 MHz
Digital
6.5 MHz
Channel 22
Exit
- M o v e
√ - s e l e c t
Test Picture
Video
On
Audio
Preferred
Audio
English
Deutsch
Francais
Nederlands
E x i t : Q u i t
Advertisement
Table of Contents
