Haier HWT12AD1 User Manual page 14

Operation and Wash Cycles
E: "Spin Speed" button
Use this button to select the spin speed, press"Spin Speed"button to
choose
Spin
No Spin: The machine will drain water out. Eco and Express can not choose
Speed
"No Spin".
Delicate, Wool and Bulky cycles,"High"spin speed can not be chosen.
F: " Advance Wash " button
Press Advance Wash button to choose"Soak""Wash""Rinse"
"Spin".
On Eco, Express and Wool cycles,
Advance
Wash
When no Spin is selected or Advance Wash is selected, Spin is not optional.
After Wi-Fi connection is successful, if you use the mobile APP to control
the washing machine, press "Advance Wash" + "Delay Start" for 3 seconds
at the same time, when the remote authorization indicator light is lit solidly.
You can use the mobile APP to run your washing machine.
G: "Delay Start " button
Delay will be set if the user presses the Delay start button. Delay starts
at a minimum of 15 minutes the next increment is 30 minutes.
From there it increases in 1 hour increments e.g.1, 2, 3,4, 5 hours, etc,
to a maximum of 12 hours.
NOTE:
Delay
Delay Start counts down in hours and minutes.
Start
Delay displays the approximate length of time before the chosen cycle will
start.
The Delay time remaining will display solidly lit on the viewing screen.
When a delay cycle is started, the displayed viewing screen the reservation
time remaining will flash to show it has started.
If a delay has been started, then paused, the delay led will flash to indicate
it is paused, and the viewing screen will display solidly.
H: "
After the machine is powered on, press the"
machine.
To pause the wash cycle, press the"
To restart a wash cycle, press the"
"No Spin""Low""Med""High"
" button
.
"Soak"function cannot be chosen.
"button.
"button again.
12
"button to start the