3-8
Using the Keyboard
Enabling the Keypad at Startup
To set the computer to start up with the embedded numeric keypad enabled:
1. Turn on or restart the computer, then press F10 when the blinking cursor
2. Select AdvancedÅDevice Options, then press Enter.
3. Toggle the field beside Num Lock State at Boot to On, then press F10.
4. To save your preferences, close Computer Setup, and restart the
5. When you are prompted to confirm your action, press F10.
To disable the embedded numeric keypad at start up, repeat the above
procedure with the Num Lock State at Boot field toggled Off.
NOTE: The embedded numeric keypad can be enabled or disabled with
Fn+Num Lk in either startup state.
appears in the upper-right corner of the screen.
To change the language, press F2.
For navigation instructions, press F1.
computer, select FileÅSave Changes and Exit, then press Enter.