Disabling The Numeric Keypad; Converting The Numeric Keypad Keys To; Standard Keys; Enabling The Numeric Keypad At Startup - Compaq Evo N400c Hardware Manual

Keyboard and Pointing Devices

Disabling the Numeric Keypad

To disable the keypad and return the keys to their standard
keyboard functions, press

Converting the Numeric Keypad Keys to

Standard Keys

To use the keypad keys temporarily as standard keys while the
keypad is enabled:
Press and hold
Press and hold
When the

Enabling the Numeric Keypad at Startup

To set the computer to start up with the keypad enabled:
1. Turn on or restart the computer, then press
F10 = ROM Based Setup message is displayed in the
lower-left corner of the screen.
2. To change the language, press
3. For navigation instructions, press
4. Select Advanced > Device Options and press
5. Toggle on the Num Lock State at Boot field, then press
6. To save your selections, select File > Save Changes and Exit,
then press
7. When prompted to confirm your action, press
To disable the embedded numeric keypad at startup, repeat the
above procedure, toggling off the Num Lock State at Boot field.
3–10
to type in lowercase.
Fn
Fn+shift
key is released, the keypad function returns.
Fn
enter.
.
Fn+Num Lk
to type in uppercase.
F2.
F1.
when the
F10
enter.
F10.
F10.
Hardware Guide