Pointing Devices and Keyboard
Converting the Numeric Keypad Keys to
Standard Keys
To use the keypad keys temporarily as standard keys while the
keypad is enabled:
■
Press and hold
■
Press and hold
When the
Enabling the Numeric Keypad at Startup
To set the notebook to start up with the keypad enabled:
1. Turn on or restart the notebook, then press
F10 = ROM Based Setup message is displayed in the
lower-left corner of the screen.
2. To change the language, press
3. For navigation instructions, press
4. Select Advanced > Device Options and press
5. Toggle on the Num Lock State at Boot field, then press
6. To save your selections, select File > Save Changes and Exit,
then follow the instructions on the screen
7. When prompted to confirm your action, press
To disable the embedded numeric keypad at startup, repeat the
above procedure, toggling off the Num Lock State at Boot field.
✎
The embedded numeric keypad can be enabled or disabled with
Fn+num lk
3–8
to type in lowercase.
Fn
Fn+shift
key is released, the keypad function returns.
Fn
in either startup state.
to type in uppercase.
F2.
F1.
when the
F10
enter.
.
F10.
Hardware Guide
F10.